ChemBK
  • Home
  • Product Category


VASELINE OIL EXTRA PURE COSMETIC GRADE

White mineral oil (petroleum)

CAS: 8012-95-1;8042-47-5

Molecular Formula:

  1. Home
  2. Product Category
  3. Tanning and retanning agents
  4. Chemical additives
  5. VASELINE OIL EXTRA PURE COSMETIC GRADE

VASELINE OIL EXTRA PURE COSMETIC GRADE - Names and Identifiers

Name White mineral oil (petroleum)
Synonyms ruanpibai oil
Nujol
Whiteruss
White oil
Mineral oil
Paraffin oil
Paraffin oils
Paraffin liquid
LIQUID PARAFFIN
LIGHT WHITE OIL
Liquid Paraffin
LIQUID PETROLATUM
Petroleum white mineral oil
White mineral oil (petroleum)
Paraffin liquid for oil baths
1 4-DIOXAN SPECTRANAL STABILIZED
PARAFFIN OIL, FOR IR-SPECTROSCOPY
VASELINE OIL EXTRA PURE COSMETIC GRADE
LIGHT WHITE MINERAL OIL, SULFURDEPLETED
PARAFFIN VISCID, EXTRA PURE, DAB, PH. EU R., B. P., PH. FRANC.
CAS 8012-95-1
8042-47-5
EINECS 232-384-2

VASELINE OIL EXTRA PURE COSMETIC GRADE - Physico-chemical Properties

Density0.827-0.890 g/mL at 20 °C
Melting Point-24 °C (lit.)
Boling Point300 °C (lit.)
Flash Point>300°C
Water SolubilitySoluble in ether. Sparingly soluble in ethanol. Not miscible or difficult to mix in water.
SolubilityPractically insoluble in ethanol (95%), glycerin, andwater; soluble in acetone, benzene, chloroform, carbon disulfide,ether, and petroleum ether. Miscible with volatile oils and fixedoils, with the exception of castor oil.
AppearanceWhite to yellowish solid
Specific Gravity0.870 (20/4℃)
Colorwhite
OdorOdorless
Exposure LimitACGIH: TWA 5 mg/m3OSHA: TWA 5 mg/m3NIOSH: IDLH 2500 mg/m3; TWA 5 mg/m3; STEL 10 mg/m3
Merck14,7023
Storage Condition贮存于室内阴凉处。贮运时应防雨、防潮,避免曝晒。贮存期12个月。
Refractive Indexn20/D 1.467(lit.)
Physical and Chemical Properties

density 0.877
refractive index 1.476-1.483
flash point 220°C
water-soluble insoluble

UseMainly used in the manufacture of washing powder, synthetic detergent, etc., can also be used for the synthesis of petroleum protein, plastic plasticizer, pesticide emulsifier, etc
CautionNon hazardous materials, low irritant. This product is flammable, so strict precautions should be taken against ignition during storage and transportation.

VASELINE OIL EXTRA PURE COSMETIC GRADE - Risk and Safety

Risk CodesR36 - Irritating to the eyes
R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. 
WGK Germany1
RTECSPY8030000
TSCAYes
HS Code27122090
ToxicityLD50 oral in rat: > 24gm/kg

VASELINE OIL EXTRA PURE COSMETIC GRADE - Upstream Downstream Industry

Raw Materialsparaffin

VASELINE OIL EXTRA PURE COSMETIC GRADE - Nature

Open Data Verified Data

colorless translucent liquid, tasteless, odorless, soluble in ether, petroleum ether, volatile oil, miscible with most non-volatile oils (excluding castor oil), insoluble in water and ethanol. It is stable to light, heat and acid, but it will slowly oxidize when heated or illuminated for a long time.

Last Update:2025-06-10 22:55:16

VASELINE OIL EXTRA PURE COSMETIC GRADE - Preparation Method

Open Data Verified Data

The oil lubricating fraction is refined by dewaxing, sulfur removal, deodorization and unsaturated hydrocarbon removal.

Last Update:2022-01-01 10:09:13

VASELINE OIL EXTRA PURE COSMETIC GRADE - Standard

Authoritative Data Verified Data

A mixture of several liquid saturated hydrocarbons from petroleum.

Last Update:2024-01-02 23:10:35

VASELINE OIL EXTRA PURE COSMETIC GRADE - Trait

Authoritative Data Verified Data
  • This product is colorless and transparent oily liquid; Odorless, tasteless; Does not show fluorescence in the light.
  • This product can be mixed with three gas methane or ether, in addition to castor oil, and most fatty oils can be mixed, slightly soluble in ethanol, insoluble in water.

relative density

The relative density of this product (General 0601) is 0. 830~860.


viscosity

The kinematic viscosity of this product (General rule 0633 method 1) shall not be less than 12 mm2/s at 40°C (the inner diameter of capillary tube is 1. 0mm ± 0. 05mm).

Last Update:2022-01-01 11:24:02

VASELINE OIL EXTRA PURE COSMETIC GRADE - Application

Open Data Verified Data

used as a defoaming agent and a film covering agent. For hot food surface coating, food glazing, anti-stick, moisture-proof, anti-foaming, sealing, demolding, etc., to extend the storage and shelf life of fruits, vegetables, eggs, cans, etc, it is also suitable for lubricating oil of food processing equipment and cleaning oil of food machinery. China can be used for soft candy and egg preservation, the maximum use of 5. Og/kg.

Last Update:2025-08-19 16:24:40

VASELINE OIL EXTRA PURE COSMETIC GRADE - Differential diagnosis

Authoritative Data Verified Data
  1. take 5ml of this product, place it in a crucible, heat it and ignite it, and produce a bright flame when burning, accompanied by the smell of paraffin wax.
  2. take 0.5g of this product, put it in a dry test tube, add the same amount of sulfur, shake and heat, and generate the odor of hydrogen sulfide.
Last Update:2022-01-01 11:24:02

VASELINE OIL EXTRA PURE COSMETIC GRADE - Exam

Authoritative Data Verified Data

pH

take 1 0 m l of this product, Add 10ml of boiling water and 1 drop of phenolphthalein indicator solution, shake strongly, the solution should be colorless; Use sodium hydroxide titration solution (0. 02mol/L) titrated to the solution pink, consumption of sodium hydroxide titration solution (0. 02mol/L) can not pass 0. 20ml.


sulfide

take this product 4. 0ML, add 2 drops of sodium hydroxide solution (1-5) of saturated lead oxide, add 2ml of ethanol, shake well, heat in 70°C water bath for 10 min, shake at the same time, after cooling, no brown-black color.


precision content of polycyclic aromatic hydrocarbons

take 25ml of this product, place it in a separatory funnel, add 25ml of n-hexane, mix it well, then add 5ml of dimethyl sulfoxide, shake it vigorously for 2 minutes, and let it stand still to make layers, the dimethyl sulfoxide layer is transferred to another separatory funnel, washed with 2M l of n-hexane by shaking, and then left to stand (centrifuged if necessary) to separate the dimethyl sulfoxide layer as a sample solution; in addition, 2 5 m l of n-hexane was added into a 50ml separatory funnel, and 5ml of dimethyl sulfoxide was added precisely. The mixture was shaken vigorously for 2 minutes, and left to stand to make the layers separated, according to ultraviolet-visible spectrophotometry (General rule 0401), the absorbance is measured in the wavelength range of 260 ~ 350nm, and the maximum absorbance shall not exceed 0.10.


solid paraffin

take an appropriate amount of this product, dry it at 105°C for 2 hours, put it in a sulfuric acid dryer and let it cool, place it in a 50ml nano-colorimetric tube to 50tnl, pack it, and let it cool at 0°C for 4 hours, if it produces turbidity, and the control solution (take 0 .0 1m ol/L hydrochloric acid solution 0.15, 6M l of dilute nitric acid and silver nitrate solution l.O m h diluted with water to 50ml, placed in the dark for 5 minutes) comparison, not more concentrated.


easily carbonized

take 5ml of this product, set a colorimetric tube with a length of about 160mm and an inner diameter of about 25mm, and add sulfuric acid [containing H 2 S 0 4 94. 5% to 95%. 5% (g/g)]5ml, heated in a boiling water bath, quickly removed after 30 seconds, occluded, strongly shaken up and down for 3 times, the amplitude was more than 12cm, not more than 3 seconds, then place it in a water bath and heat it, take it out every 30 seconds, shake it as above, soak it in a water bath from the test tube, take it out after 10 minutes, and let it stand still to make layers, check according to law (General rule 0842), paraffin layer shall not be colored; If the sulfuric acid layer is colored, compare with the control solution (take 1.5 of potassium dichromate solution for color comparison and cobalt solution for gasification for color comparison 1 .3M l and colorimetric copper sulfate liquid 0.5ml, add water 1.7ml, plus this product 5M l mixture made) comparison, not deeper.


Heavy metals

take this product l.O g, place in the crucible, slowly cauterize until charring, burn at 450 ~ 550C to make it ash completely, let it cool, add 2ml of hydrochloric acid, and let it dry on a water bath, inspection according to law (General Principles 0821 second law), containing heavy metals shall not exceed 10 parts per million.


arsenic salt

take this product l.O g, place in the crucible, add 1 0 m l of 2% ethanol solution of magnesium nitrate, burn to Ash (if there is any uncarbonized substance, add a little nitric acid, after being burned to ash again, the patient was allowed to cool down, added with 0822 hydrochloric acid, heated and dissolved on a water bath, added with 2 3 m l water, and checked according to law (General Principles, Law 1), should comply with the provisions (0. 0002%).

Last Update:2022-01-01 11:24:03

VASELINE OIL EXTRA PURE COSMETIC GRADE - Category

Authoritative Data Verified Data

pharmaceutical excipients, lubricants and ointment base.

Last Update:2022-01-01 11:24:03

VASELINE OIL EXTRA PURE COSMETIC GRADE - Storage

Authoritative Data Verified Data

sealed storage.

Last Update:2022-01-01 11:24:03

VASELINE OIL EXTRA PURE COSMETIC GRADE - Reference Information

EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
Introduction Paraffinic Oil (or Paraffinic Oil) refers to, in particular, any of the colorless, odorless, higher alkanes extracted from petroleum fractions. Generally, paraffin oil is a by-product in the process of manufacturing gasoline by fractionating petroleum and petroleum raw materials. Paraffin oil is transparent, colorless, mainly composed of alkanes, cyclic paraffin (related to Vaseline). Paraffin oil can be divided into light, heavy grade, its density is about 0.8g/cm3. Paraffin oil production is very large, the price is low, often sold in pharmacies.
Use as defoaming agent and coating agent, China can be used for soft candy and egg preservation, the maximum use of 5.0g/kg; can also be used for bread stripping and fermentation process defoaming, according to the production needs of the appropriate amount of use.
mainly used in the manufacture of washing powder, synthetic detergent, etc., can also be used for the synthesis of petroleum protein, plastic plasticizer, pesticide emulsifier, etc.
gas chromatography stationary liquid (maximum temperature 120 ℃, the solvent is toluene), the separation and analysis of hydrocarbons, halogenated hydrocarbons and inorganic compounds and fatty acid esters. Temperature transfer solution. Refractive index liquid. Lubricant. Drug adjuvant.
production method the product is refined from petroleum lubricating oil fraction by dewaxing, sulfur removal, deodorization and unsaturated hydrocarbon removal.
category flammable liquid
toxicity grade low toxicity
Acute toxicity oral-mouse LD50: 22000 mg/kg
stimulation data Skin-rabbits 100 mg/24 h mild; eye-rabbit 5 mg severe
flammability hazard characteristics flammable in open flame, high temperature, strong oxidant; combustion emissions
storage and transportation characteristics The package is complete, light, light; The warehouse is ventilated, away from open flame, high temperature, separate from oxidant
fire extinguishing agent foam, CO2, 1211, dry powder
Occupational Standard TLV-TWA 5 mg/m3; Tel 10 mg/m3
spontaneous combustion temperature 245°C
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
immediate life-threatening and health concentration 2,500 mg/m3
Last Update:2024-06-11 15:23:59
Supplier List
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Paraffin liquid Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Jiangsu Pules Biotechnology Co.,Ltd.
Multiple Specifications
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 0513-66814854
Email: pules.cn@gmail.com
Mobile: +86-17551318830
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Multiple SpecificationsSpot supply
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8042-47-5
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Shandong Xinhe new material Co .,Ltd
Spot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: 15662672320
Email: 2360124261@qq.com
Mobile: 15662672320
QQ: 2360124261 Click to send a QQ message
Wechat: 15662672320
WhatsApp: 15662672320
Shanghai Amole Biotechnology Co., Ltd.
Multiple SpecificationsSpot supply
Product Name: Paraffinliquid Request for quotation
CAS: 8042-47-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Multiple SpecificationsSpot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
MedChemExpress (MCE)
Multiple SpecificationsSpot supply
Product Name: White mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: 609-228-6898
Email: sales@medchemexpress.com
     tech@medchemexpress.com
Mobile: 609-228-6898
SKYRUN INDUSTRIAL CO.,LTD
Multiple SpecificationsSpot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Paraffin liquid Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Jiangsu Pules Biotechnology Co.,Ltd.
Multiple Specifications
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 0513-66814854
Email: pules.cn@gmail.com
Mobile: +86-17551318830
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Multiple SpecificationsSpot supply
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8042-47-5
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Shandong Xinhe new material Co .,Ltd
Spot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: 15662672320
Email: 2360124261@qq.com
Mobile: 15662672320
QQ: 2360124261 Click to send a QQ message
Wechat: 15662672320
WhatsApp: 15662672320
Shanghai Amole Biotechnology Co., Ltd.
Multiple SpecificationsSpot supply
Product Name: Paraffinliquid Request for quotation
CAS: 8042-47-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Multiple SpecificationsSpot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
MedChemExpress (MCE)
Multiple SpecificationsSpot supply
Product Name: White mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: 609-228-6898
Email: sales@medchemexpress.com
     tech@medchemexpress.com
Mobile: 609-228-6898
SKYRUN INDUSTRIAL CO.,LTD
Multiple SpecificationsSpot supply
Product Name: Mineral oil Visit Supplier Webpage Request for quotation
CAS: 8042-47-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: White mineral oil (petroleum) Request for quotation
CAS: 8012-95-1
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
View History
VASELINE OIL EXTRA PURE COSMETIC GRADE
LiOTFP
dodecyl radical
ISONICOTINYL CHLORIDE HYDROCHLORIDE
LS-9779
pbb 80
Raw Materials for VASELINE OIL EXTRA PURE COSMETIC GRADE
paraffin
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001